Warning, /geant4/examples/extended/parameterisations/Par04/examplePar04.out is written in an unsupported language. File is not indexed.
0001 Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type...
0002
0003 ############################################
0004 !!! WARNING - FPE detection is activated !!!
0005 ############################################
0006
0007
0008 ################################
0009 !!! G4Backtrace is activated !!!
0010 ################################
0011
0012
0013 **************************************************************
0014 Geant4 version Name: geant4-11-03-ref-06 (30-June-2025)
0015 Copyright : Geant4 Collaboration
0016 References : NIM A 506 (2003), 250-303
0017 : IEEE-TNS 53 (2006), 270-278
0018 : NIM A 835 (2016), 186-225
0019 WWW : http://geant4.org/
0020 **************************************************************
0021
0022 <<< Geant4 Physics List simulation engine: FTFP_BERT
0023
0024
0025 ------------------------------------------------------
0026 --- Detector length: 2 m
0027 --- Detector inner radius: 80 cm
0028 --- Number of layers: 90
0029
0030 --- 1st layer: 1.4 mm of passive G4_W
0031 --- 2nd layer: 300 um of active G4_Si
0032 -----------------------------------------------------
0033
0034 ------------------------------------------------------
0035 Readout geometry with physics layout is set in parallel geometry:
0036 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0037 Number of layers is determined by number of layers set in detector construction.
0038 - Number of layers: 90
0039 ------- Number of slices: 320
0040 - Number of rows: 100
0041 Readout will collect energy for full simulation.
0042 ------- Therefore thickness is only a thickness of sensitive absorbers = 300 um
0043 -----------------------------------------------------
0044 Checking overlaps for volume Detector:9999 (G4Tubs) ... OK!
0045
0046 ------------------------------------------------------
0047 Readout geometry with physics layout is set in parallel geometry:
0048 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0049 Number of layers is determined by number of layers set in detector construction.
0050 - Number of layers: 90
0051 ------- Number of slices: 320
0052 - Number of rows: 100
0053 Readout will collect energy for full simulation.
0054 ------- Therefore thickness is only a thickness of sensitive absorbers = 300 um
0055 -----------------------------------------------------
0056
0057 ------------------------------------------------------
0058 Readout geometry with physics layout is set in parallel geometry:
0059 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0060 Number of layers is determined by number of layers set in detector construction.
0061 - Number of layers: 90
0062 ------- Number of slices: 320
0063 - Number of rows: 100
0064 Readout will collect energy from fast simulation.
0065 ------- Thickness is a sum of all absorbers = 1.7 mm
0066 -----------------------------------------------------
0067 Checking overlaps for volume Detector:9999 (G4Tubs) ... OK!
0068
0069 ------------------------------------------------------
0070 Readout geometry with physics layout is set in parallel geometry:
0071 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0072 Number of layers is determined by number of layers set in detector construction.
0073 - Number of layers: 90
0074 ------- Number of slices: 320
0075 - Number of rows: 100
0076 Readout will collect energy from fast simulation.
0077 ------- Thickness is a sum of all absorbers = 1.7 mm
0078 -----------------------------------------------------
0079 --- G4CoupledTransportation is used
0080 ### Adding tracking cuts for neutron TimeCut(ns)= 10000 KinEnergyCut(MeV)= 0
0081 e+ : fastSimProcess_massGeom[geom:World]
0082 e- : fastSimProcess_massGeom[geom:World]
0083 gamma : fastSimProcess_massGeom[geom:World]
0084 Model defineMesh activated.
0085 Model inferenceModel not found.
0086
0087 -------- WWWW ------- G4Exception-START -------- WWWW -------
0088 *** G4Exception : Analysis_W001
0089 issued by : G4RootNtupleFileManager::SetNtupleMergingMode
0090 Merging ntuples is not applicable in sequential application.
0091 Setting was ignored.
0092 *** This is just a warning message. ***
0093 -------- WWWW -------- G4Exception-END --------- WWWW -------
0094
