Warning, /geant4/examples/extended/parameterisations/Par04/examplePar04.out is written in an unsupported language. File is not indexed.
0001 Environment variable "G4FORCE_RUN_MANAGER_TYPE" enabled with value == Serial. Forcing G4RunManager type...
0002
0003 ############################################
0004 !!! WARNING - FPE detection is activated !!!
0005 ############################################
0006
0007
0008 ################################
0009 !!! G4Backtrace is activated !!!
0010 ################################
0011
0012
0013 **************************************************************
0014 Geant4 version Name: geant4-11-02-ref-06 (28-June-2024)
0015 Copyright : Geant4 Collaboration
0016 References : NIM A 506 (2003), 250-303
0017 : IEEE-TNS 53 (2006), 270-278
0018 : NIM A 835 (2016), 186-225
0019 WWW : http://geant4.org/
0020 **************************************************************
0021
0022 <<< Geant4 Physics List simulation engine: FTFP_BERT
0023
0024 Instantiating Visualization Manager.......
0025 Visualization Manager instantiating with verbosity "warnings (3)"...
0026 Visualization Manager initialising...
0027 Registering graphics systems...
0028
0029 You have successfully registered the following graphics systems.
0030 Registered graphics systems are:
0031 ASCIITree (ATree)
0032 DAWNFILE (DAWNFILE)
0033 G4HepRepFile (HepRepFile)
0034 RayTracer (RayTracer)
0035 VRML2FILE (VRML2FILE)
0036 gMocrenFile (gMocrenFile)
0037 TOOLSSG_OFFSCREEN (TSG_OFFSCREEN)
0038 TOOLSSG_OFFSCREEN (TSG_OFFSCREEN, TSG_FILE)
0039 OpenGLImmediateQt (OGLIQt, OGLI)
0040 OpenGLStoredQt (OGLSQt, OGL, OGLS)
0041 OpenGLImmediateXm (OGLIXm, OGLIQt_FALLBACK)
0042 OpenGLStoredXm (OGLSXm, OGLSQt_FALLBACK)
0043 OpenGLImmediateX (OGLIX, OGLIQt_FALLBACK, OGLIXm_FALLBACK)
0044 OpenGLStoredX (OGLSX, OGLSQt_FALLBACK, OGLSXm_FALLBACK)
0045 RayTracerX (RayTracerX)
0046 Qt3D (Qt3D)
0047 TOOLSSG_X11_GLES (TSG_X11_GLES, TSGX11, TSG_XT_GLES_FALLBACK)
0048 TOOLSSG_X11_ZB (TSG_X11_ZB, TSGX11ZB)
0049 TOOLSSG_XT_GLES (TSG_XT_GLES, TSGXt, TSG_QT_GLES_FALLBACK)
0050 TOOLSSG_XT_ZB (TSG_XT_ZB, TSGXtZB)
0051 TOOLSSG_QT_GLES (TSG_QT_GLES, TSGQt, TSG)
0052 TOOLSSG_QT_ZB (TSG_QT_ZB, TSGQtZB)
0053 You may choose a graphics system (driver) with a parameter of
0054 the command "/vis/open" or "/vis/sceneHandler/create",
0055 or you may omit the driver parameter and choose at run time:
0056 - by argument in the construction of G4VisExecutive
0057 - by environment variable "G4VIS_DEFAULT_DRIVER"
0058 - by entry in "~/.g4session"
0059 - by build flags.
0060 - Note: This feature is not allowed in batch mode.
0061 For further information see "examples/basic/B1/exampleB1.cc"
0062 and "vis.mac".
0063
0064 Registering model factories...
0065
0066 You have successfully registered the following model factories.
0067 Registered model factories:
0068 generic
0069 drawByAttribute
0070 drawByCharge
0071 drawByOriginVolume
0072 drawByParticleID
0073 drawByEncounteredVolume
0074
0075 Registered models:
0076 None
0077
0078 Registered filter factories:
0079 attributeFilter
0080 chargeFilter
0081 originVolumeFilter
0082 particleFilter
0083 encounteredVolumeFilter
0084
0085 Registered filters:
0086 None
0087
0088 You have successfully registered the following user vis actions.
0089 Run Duration User Vis Actions: none
0090 End of Event User Vis Actions: none
0091 End of Run User Vis Actions: none
0092
0093 Some /vis commands (optionally) take a string to specify colour.
0094 "/vis/list" to see available colours.
0095
0096 ------------------------------------------------------
0097 --- Detector length: 2 m
0098 --- Detector inner radius: 80 cm
0099 --- Number of layers: 90
0100
0101 --- 1st layer: 1.4 mm of passive G4_W
0102 --- 2nd layer: 300 um of active G4_Si
0103 -----------------------------------------------------
0104
0105 ------------------------------------------------------
0106 Readout geometry with physics layout is set in parallel geometry:
0107 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0108 Number of layers is determined by number of layers set in detector construction.
0109 - Number of layers: 90
0110 ------- Number of slices: 320
0111 - Number of rows: 100
0112 Readout will collect energy for full simulation.
0113 ------- Therefore thickness is only a thickness of sensitive absorbers = 300 um
0114 -----------------------------------------------------
0115 Checking overlaps for volume Detector:9999 (G4Tubs) ... OK!
0116
0117 ------------------------------------------------------
0118 Readout geometry with physics layout is set in parallel geometry:
0119 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0120 Number of layers is determined by number of layers set in detector construction.
0121 - Number of layers: 90
0122 ------- Number of slices: 320
0123 - Number of rows: 100
0124 Readout will collect energy for full simulation.
0125 ------- Therefore thickness is only a thickness of sensitive absorbers = 300 um
0126 -----------------------------------------------------
0127
0128 ------------------------------------------------------
0129 Readout geometry with physics layout is set in parallel geometry:
0130 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0131 Number of layers is determined by number of layers set in detector construction.
0132 - Number of layers: 90
0133 ------- Number of slices: 320
0134 - Number of rows: 100
0135 Readout will collect energy from fast simulation.
0136 ------- Thickness is a sum of all absorbers = 1.7 mm
0137 -----------------------------------------------------
0138 Checking overlaps for volume Detector:9999 (G4Tubs) ... OK!
0139
0140 ------------------------------------------------------
0141 Readout geometry with physics layout is set in parallel geometry:
0142 Cylindrical detector is divided along radius (layers), phi (slices), and z (rows).
0143 Number of layers is determined by number of layers set in detector construction.
0144 - Number of layers: 90
0145 ------- Number of slices: 320
0146 - Number of rows: 100
0147 Readout will collect energy from fast simulation.
0148 ------- Thickness is a sum of all absorbers = 1.7 mm
0149 -----------------------------------------------------
0150 --- G4CoupledTransportation is used
0151 ### Adding tracking cuts for neutron TimeCut(ns)= 10000 KinEnergyCut(MeV)= 0
0152 e+ : fastSimProcess_massGeom[geom:World]
0153 e- : fastSimProcess_massGeom[geom:World]
0154 gamma : fastSimProcess_massGeom[geom:World]
0155 Model defineMesh activated.
0156 Model inferenceModel not found.
0157 G4VisManager: Using G4TrajectoryDrawByCharge as fallback trajectory model.
0158 See commands in /vis/modeling/trajectories/ for other options.
0159
0160 -------- WWWW ------- G4Exception-START -------- WWWW -------
0161 *** G4Exception : Analysis_W001
0162 issued by : G4RootNtupleFileManager::SetNtupleMergingMode
0163 Merging ntuples is not applicable in sequential application.
0164 Setting was ignored.
0165 *** This is just a warning message. ***
0166 -------- WWWW -------- G4Exception-END --------- WWWW -------
0167
0168 There are histograms that can be viewed with visualization:
0169 22 h1 histograms(s)
0170 List them with "/analysis/list".
0171 View them immediately with "/vis/plot" or "/vis/reviewPlots".
0172 But...there are no entries. To make your histograms available for
0173 plotting in this UI session, use CloseFile(false) in your
0174 EndOfRunAction and Reset() in your BeginOfRunAction.
0175 Graphics systems deleted.
0176 Visualization Manager deleting...
