Hadr10/src/DetectorMessenger.cc

0001 //
0002 // ********************************************************************
0003 // * License and Disclaimer                                           *
0004 // *                                                                  *
0005 // * The  Geant4 software  is  copyright of the Copyright Holders  of *
0006 // * the Geant4 Collaboration.  It is provided  under  the terms  and *
0007 // * conditions of the Geant4 Software License,  included in the file *
0008 // * LICENSE and available at  http://cern.ch/geant4/license .  These *
0009 // * include a list of copyright holders.                             *
0010 // *                                                                  *
0011 // * Neither the authors of this software system, nor their employing *
0012 // * institutes,nor the agencies providing financial support for this *
0013 // * work  make  any representation or  warranty, express or implied, *
0014 // * regarding  this  software system or assume any liability for its *
0015 // * use.  Please see the license in the file  LICENSE  and URL above *
0016 // * for the full disclaimer and the limitation of liability.         *
0017 // *                                                                  *
0018 // * This  code  implementation is the result of  the  scientific and *
0019 // * technical work of the GEANT4 collaboration.                      *
0020 // * By using,  copying,  modifying or  distributing the software (or *
0021 // * any work based  on the software)  you  agree  to acknowledge its *
0022 // * use  in  resulting  scientific  publications,  and indicate your *
0023 // * acceptance of all terms of the Geant4 Software license.          *
0024 // ********************************************************************
0025 //
0026 /// \file DetectorMessenger.cc
0027 /// \brief Implementation of the DetectorMessenger class
0028 //
0029 //
0030
0031 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
0032 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
0033
0034 #include "DetectorMessenger.hh"
0035
0036 #include "DetectorConstruction.hh"
0037
0038 #include "G4UIcmdWithADoubleAndUnit.hh"
0039 #include "G4UIcmdWithAString.hh"
0040 #include "G4UIcmdWithoutParameter.hh"
0041 #include "G4UIdirectory.hh"
0042 #include "globals.hh"
0043
0044 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
0045
0046 DetectorMessenger::DetectorMessenger(DetectorConstruction* myDet)
0047   : G4UImessenger(), fDetector(myDet)
0048 {
0049   fDetectorDir = new G4UIdirectory("/mydet/");
0050   fDetectorDir->SetGuidance("Detector control.");
0051
0052   fFieldCommand = new G4UIcmdWithADoubleAndUnit("/mydet/setField", this);
0053   fFieldCommand->SetGuidance("Define uniform magnetic field along Y.");
0054   fFieldCommand->SetGuidance(" -> in unit of  [Tesla]");
0055   fFieldCommand->SetParameterName("By", false);
0056   fFieldCommand->SetDefaultValue(0.0);
0057   fFieldCommand->SetUnitCategory("Magnetic flux density");
0058   fFieldCommand->AvailableForStates(G4State_PreInit, G4State_Idle);
0059
0060   fTargetMaterial = new G4UIcmdWithAString("/mydet/targetMaterial", this);
0061   fTargetMaterial->SetGuidance("Choice of the target material:");
0062   fTargetMaterial->SetGuidance("   a Geant4 NIST material, e.g. G4_Be ");
0063   fTargetMaterial->SetParameterName("choiceTargetMaterial", true);
0064   fTargetMaterial->SetDefaultValue("G4_Be");
0065   fTargetMaterial->AvailableForStates(G4State_PreInit, G4State_Idle);
0066
0067   fTargetInnerRadius = new G4UIcmdWithADoubleAndUnit("/mydet/targetInnerRadius", this);
0068   fTargetInnerRadius->SetParameterName("choiceTargetInnerRadius", true);
0069   fTargetInnerRadius->SetGuidance("Target inner radius");
0070   fTargetInnerRadius->SetDefaultValue(9.0);
0071   fTargetInnerRadius->AvailableForStates(G4State_PreInit, G4State_Idle);
0072
0073   fTargetOuterRadius = new G4UIcmdWithADoubleAndUnit("/mydet/targetOuterRadius", this);
0074   fTargetOuterRadius->SetParameterName("choiceTargetOuterRadius", true);
0075   fTargetOuterRadius->SetGuidance("Target outer radius");
0076   fTargetOuterRadius->SetDefaultValue(11.0);
0077   fTargetOuterRadius->AvailableForStates(G4State_PreInit, G4State_Idle);
0078
0079   fUpdateCommand = new G4UIcmdWithoutParameter("/mydet/update", this);
0080   fUpdateCommand->SetGuidance("Update calorimeter geometry.");
0081   fUpdateCommand->SetGuidance("This command MUST be applied before \"beamOn\" ");
0082   fUpdateCommand->SetGuidance("if you changed geometrical value(s).");
0083   fUpdateCommand->AvailableForStates(G4State_PreInit, G4State_Idle);
0084 }
0085
0086 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
0087
0088 DetectorMessenger::~DetectorMessenger()
0089 {
0090   delete fDetectorDir;
0091   delete fFieldCommand;
0092   delete fTargetMaterial;
0093   delete fTargetInnerRadius;
0094   delete fTargetOuterRadius;
0095   delete fUpdateCommand;
0096 }
0097
0098 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
0099
0100 void DetectorMessenger::SetNewValue(G4UIcommand* command, G4String newValue)
0101 {
0102   if (command == fFieldCommand) {
0103     fDetector->SetMagField(fFieldCommand->GetNewDoubleValue(newValue));
0104   }
0105   if (command == fTargetMaterial) {
0106     fDetector->SetTargetMaterial(newValue);
0107   }
0108   if (command == fTargetInnerRadius) {
0109     fDetector->SetTargetInnerRadius(fTargetInnerRadius->GetNewDoubleValue(newValue));
0110   }
0111   if (command == fTargetOuterRadius) {
0112     fDetector->SetTargetOuterRadius(fTargetOuterRadius->GetNewDoubleValue(newValue));
0113   }
0114   if (command == fUpdateCommand) {
0115     fDetector->UpdateGeometry();
0116   }
0117 }
0118
0119 //....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......